JME Engineering Knowledge Base · Pakistan
Industrial Weather Station Integration with SCADA and EMS
JME Energy & Automation integrates industrial weather stations with SCADA and EMS so irradiance, wind speed and direction, temperature, humidity, precipitation and atmospheric-pressure data can be monitored and historized alongside plant electrical and solar-performance data.
Weather intelligence
Environmental data gives energy data context
A weather station does not control a solar plant by itself. It provides the environmental measurements needed to interpret PV production, compare expected and observed performance, support alarms and understand operating conditions.
Solar Irradiance
Provides the primary environmental reference for interpreting available PV resource.
Ambient Temperature
Adds context for module and inverter performance and site operating conditions.
Wind Speed & Direction
Supports environmental monitoring and correlation with site events.
Relative Humidity
Provides environmental context for equipment and performance analysis.
Precipitation
Can support maintenance context and interpretation of changing site conditions.
Atmospheric Pressure
Adds a broader environmental record where the project requires it.
SCADA integration
From sensors to usable engineering information
- Confirm sensor ranges, units and calibration information
- Map Modbus or other documented station registers
- Apply scaling, validation and bad-quality handling
- Time-align weather and electrical measurements
- Present live values on SCADA dashboards
- Store historian trends for performance comparison
- Create practical high/low and communication alarms
- Document maintenance and calibration requirements
JME deployments
Integrated at Sazgar and Malakand University
JME has integrated weather-station data into monitoring environments at Sazgar Engineering Works and Malakand University. The scope can connect environmental measurements with solar output, grid/genset operation and EMS trends.
Engineering answers
Frequently asked questions
Which measurements can JME integrate?
Depending on the selected station: irradiance, wind speed, wind direction, ambient temperature, humidity, precipitation and atmospheric pressure.
Can weather data be shown in an existing SCADA?
Often yes when the station provides a documented compatible interface and the existing SCADA can accept the required tags.
Does a weather station prove solar underperformance?
It provides essential context, but conclusions also require correct sensor placement, calibration, electrical measurements and suitable analytical methods.
Review your plant before selecting a controller
Share the SLD, inverter models, generator controllers and operating objective with JME.