JME Engineering Guides · Solar retrofit
GoodWe Hybrid Inverter Integration in Pakistan
Quick answer. A GoodWe hybrid inverter can work alongside existing solar and batteries, and some models support a generator. Start with the exact inverter and battery model numbers. Then ask two questions: what should keep running when WAPDA goes out, and should the generator be able to charge the battery?
Published by JME Energy & Automation ·
What to verify before buying or retrofitting
| What you want | What to check |
|---|---|
| Keep existing on-grid solar | Check whether GoodWe documents AC coupling for both inverter models and the proposed connection. Existing solar can remain grid-side in some designs and stop during an outage. Running it during backup requires a separately verified operating mode. |
| Add a battery | Match the exact inverter and battery models against GoodWe’s current compatibility list. Verify the voltage class, required firmware and battery management communication. Compare usable battery energy for runtime and backup power limits for the loads you want to carry. |
| Use a diesel generator | Confirm whether the exact GoodWe model supports generator input, generator charging, and any required start signal. Define which source supplies the loads during transfer and whether solar is allowed to run while the generator is online. |
| Limit or prevent export | Confirm where the site measures import and export, which inverters the control system can reduce, and what happens if the meter or communications fail. A setting on one inverter may leave another inverter producing on the same site. |
| Keep critical loads running | Identify which circuits need backup and which can drop out. Check continuous load, motor starting demand where applicable, and how the system will return to utility power. |
Example. Your existing on-grid solar may run alongside the hybrid inverter while WAPDA is available, then switch off during an outage while the battery supplies selected loads. Keeping the existing solar active during the outage is a separate design requirement. GoodWe’s ET LV documentation is one model-specific reference for checking the supported arrangements.
How JME integrated a mixed system in Quetta
At the UNICEF Quetta site, JME brought GoodWe hybrid inverters, batteries, a 100 kW SOFAR on-grid inverter, two generators, WAPDA supply and weather monitoring into a shared SYNCGEN EMS operating view. The project also included site export-control logic. This is an example of coordinating equipment from multiple vendors at one site.
Common questions
Can I keep my existing on-grid solar when I add a GoodWe hybrid inverter?
Often, yes. Existing solar can remain connected for grid operation if the design permits it. To keep it producing during an outage, verify that the exact equipment and backup arrangement support AC coupling in that mode.
Can a generator charge the battery through a GoodWe hybrid inverter?
Some models and configurations support it. Check the model’s manual for generator input and charging, then confirm the source transfer arrangement and the charging demand the generator can carry alongside the loads.
Can I connect any lithium battery with the same voltage?
Use GoodWe’s current compatibility list for the exact inverter model. Voltage is one check. The battery management system also needs to communicate with the inverter as required by the approved combination.
Does GoodWe zero export cover other inverters at the site?
It depends on the metering and control design. A site-wide limit needs measurement at the shared grid connection and a way to reduce output from the relevant inverters when site demand falls.
Does Modbus or app monitoring mean an EMS can control the inverter?
Monitoring shows that data can be read. External control requires a documented, supported command for the exact model, along with feedback and a defined response if communications are lost.
What to send for a compatibility check
Share the existing solar inverter and proposed GoodWe model numbers, the battery and generator models if available, and a short list of what should stay powered during an outage. For an industrial site, also note whether solar should run on generator power and whether there is a site export limit.
Solar & Hybrid Energy Guide Series
Manufacturer references · GoodWe ET LV manual · GoodWe battery compatibility overview. Use the manual and compatibility documentation for the exact equipment and region.